Animated Joker - Hueforge

Project: Joker.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Lavender Purple Transmission Distance: 0.5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (1.28mm) swap to Lavender Purple At layer #14 (1.76mm) swap to BambuLab Green At layer #18 (2.24mm) swap to Jade White for the rest.