Another Bird Feeder

Another Bird Feeder

Description

Springtime and another bird feeder, French style, easy to print and assemble.

You will need to print the following parts :

The roof : either in 1 part (if your printer's bed is 256 x 256 mm or larger) or in 2 halves diagonally on the printbed. The roof has a small footprint on the printbed so a brim or raft will help.
2 sides (15% infill is fine)
1 table
1 ridge-inside
1 ridge-outside (use tree-supports here)
2 sets of roofborders A and B


Other tools / supplies :

Some superglue (especially if you print the roof in 2 halves).
8 M3 bolts 5 or 6 mm long to attach the roof to the sides.
4 M3 bolts 15-16 mm and 4 M3 nuts to mount the table between the sides.
2 M3 x 20 mm bolts and nuts to assemble ridge-inside, roof and ridge-outside
8 M3 x 5 x 6 brass inserts.
Soldering iron, screw driver, superglue


Instructions :

Print all parts
Install the 8 inserts in the sides (see picture) using a solde