Another dice tower

Here's my take on a dice tower. I really liked the look of all those medieval towers, but also wanted to be able to watch the dice going down. So I designed my own.

This design uses a piece from a plastic soda bottle for the outer wall, diameter 87mm - length 170mm with a straight wall. I used a Dr.Pepper 1,5L bottle. To get the opening for the door, you can place the bottle on the base, then trace along the inside of the door using a pen or pencil. Then cut away the opening.

Note: If you have a bottle with a slightly different diameter, you can scale all the parts by X=d/87, with d diameter in mm. The required length, in mm, would be 170*X. For the 1,5L SmartWater bottle, that's commonly found in the US, X would be 103.5%.

The little knight is something i liked for decoration in the window behind the entrance. It was sliced and scaled from the model by bs3 (https://www.thingiverse.com/thing:1239427). But it's optional, you can leave it out or paint or put something else in