another Kinect handle

this is my personnal version of a kinect handle

some people ask me to share my mods, but sorry if this mod is complicated, this need good DIY competences



WARNING, IT'S NOT FOR BEGINNER!


you must know that you need to remove the orientation base.
after this mode you lose waranty!

remove the ferrite protection under the kinect and place it in the handle

there is a little hole at the bottom to place a nut tu attach the handle on a photo tripod
place a screw to maintain the nut and to prevent glue leak.

then after, prepare epoxy resin to fix the kinect in the handle big hole (the nut will be gluing too)