Thingiverse

another steampunk clock

by shire

18 Downloads

4 Likes

0 Makes

steampunk clock with flywheels and gears
printed ok from full model but 12 hours and loads supports pictures added from full print with supports removed , bu not fettled
STL's added split in two halves to limit supports,

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

12 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does another steampunk clock need supports when printing?

Yes, another steampunk clock will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print another steampunk clock?

According to the design notes, another steampunk clock takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is another steampunk clock available in?

another steampunk clock is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is another steampunk clock free to download?

Yes, another steampunk clock is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

another steampunk clock

Add to Collection