Thingiverse
Antenna Holder v2
door hcker2000
23
Downloads
11
Likes
0
Makes
This is version 2 of the universal antenna holder. It has been updated to feature slots to make using the design a lot easier. I have also enlarged the central hole to make it easier on the antenna wires.
It was designed specifically with RC users in mind. The holes for the tubes are sized for 3.2mm antenna tube commonly used in the RC hobby.
Mounting holes are for M3 bolts. Antennas feed thew the center hole which is smoothed.
Antennas holes are 90 degrees apart and the whole unit can be mounted in a ton of ways.
**UPDATE** Ok the updated file with the larger holes (ah_larger_holes.stl) is up and confirmed to work with the 3mm antenna tubes. I will leave the smaller hole version up here just in case any one has smaller tubes they are using.
It was designed specifically with RC users in mind. The holes for the tubes are sized for 3.2mm antenna tube commonly used in the RC hobby.
Mounting holes are for M3 bolts. Antennas feed thew the center hole which is smoothed.
Antennas holes are 90 degrees apart and the whole unit can be mounted in a ton of ways.
**UPDATE** Ok the updated file with the larger holes (ah_larger_holes.stl) is up and confirmed to work with the 3mm antenna tubes. I will leave the smaller hole version up here just in case any one has smaller tubes they are using.
hcker2000 publiceert ook op
1 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
