Thingiverse
Antenna protector for miniquads
door madlex
2
Downloads
5
Likes
0
Makes
About
***
Tired of getting your antenna crashed and bando's?! Well, here it's an option for you!
Follow
***
I also post pics and videos of my designs on [Instagram](https://www.instagram.com) as [madxfpv](https://www.instagram.com/madxfpv)
Design
***
I've designed and tested this with Foxeer Lollipop antennas, but it could very well work with other types of antennas. You just need to scale up the part.
It should be printed out of TPU and with 0.4 mm nozzle at most.
Scalling
***
If you have a larger antenna, measure its diameter and scale the piece by this ratio:
```
Horizontally : D/17
Vertically : H/13
```
For example, if you have a 24mm diameter antenna, you could scale this horizontally by:
```24/17 = 1,41 => 141%```
> Important!
> It is not recommended to scale down the design, walls may become thinner than intented.
Enjoy
***
Tired of getting your antenna crashed and bando's?! Well, here it's an option for you!
Follow
***
I also post pics and videos of my designs on [Instagram](https://www.instagram.com) as [madxfpv](https://www.instagram.com/madxfpv)
Design
***
I've designed and tested this with Foxeer Lollipop antennas, but it could very well work with other types of antennas. You just need to scale up the part.
It should be printed out of TPU and with 0.4 mm nozzle at most.
Scalling
***
If you have a larger antenna, measure its diameter and scale the piece by this ratio:
```
Horizontally : D/17
Vertically : H/13
```
For example, if you have a 24mm diameter antenna, you could scale this horizontally by:
```24/17 = 1,41 => 141%```
> Important!
> It is not recommended to scale down the design, walls may become thinner than intented.
Enjoy
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
