Thingiverse
Anti Z Wobble - Maker Select Plus
par jeremykmac
79
Téléchargements
47
Likes
0
Makes
This is an anti z-wobble mount that I created to replace the original z-axis rod mount for the Maker Select Plus. I created this to reduce any lateral wobble of the threaded z rod, which is not supported.
I used 8mm x 19mm x 6mm bearings for the thread rod. This allows the rod to rotate freely while still limiting any lateral wobble.
The back of the mount uses M3 x 0.5 nuts to help secure it to the printer. These are a tight fit.
I added custom supports to the nut insert, but may not be necessary considering the size.
I used 8mm x 19mm x 6mm bearings for the thread rod. This allows the rod to rotate freely while still limiting any lateral wobble.
The back of the mount uses M3 x 0.5 nuts to help secure it to the printer. These are a tight fit.
I added custom supports to the nut insert, but may not be necessary considering the size.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
