Antisplash conteiner for mist generator

Hi All,This is a simple water container for an ultrasonic mist generator with a cap that prevents splashing and spilling of water, it was designed so that water drips back to container.It is a simple, cheap generator from Amazon. The diameter is 47 mm, so if you have bigger or smaller, just follow that formula to scale it in the X/Y plane, and it should work just as well: X = R/47 * 100, where R is the radius of your diffuser in mm and X is the % value that you need to scale it uniformly in the X/Y plane. Regarding the Z axis, my generator has a 25 mm height, so if you scale it following the formula below, you can compensate for the difference as well (an extra 20 mm for water level is already included, so simply provide the height of the diffuser only). Z = h/25 * 100, where h is the height of your diffuser in mm and Z is the % value that you need to scale it uniformly in the Z plane.\ I printed it with PLA with exstra wall and did not notic any leakage.