Anycubic 4Max Pro BL Touch bracket

This is a BL Touch module for the Anycubic 4Max Pro.

To install this, you need to remove the extruder housing cover. Since the housing cover triggers the Y endstop, you need to print a replacement.

I used this one, designed by becar: https://www.thingiverse.com/thing:3852345. Installation was very easy and reversible.

This is my offset for the probe:
#define NOZZLE_TO_PROBE_OFFSET { -41, -53, -2 }

Please note: I use a v6 hotend that is shorter than the stock. If you're using stock, your z value will be different!

Printing:

Nothing special is required here. No supports necessary. I printed mine in ABS with 25% infill from memory. Any material at any infill > 20% will be fine.