Thingiverse
Anycubic Chiron Toolholder
di Tech_tweak
23
Download
9
Likes
0
Makes
This is a remix of the toolholder for the Chiron. The difference is that this one does not require the use of any screws and simply snaps into place on the printer frame.
Supports touching buildplate should be used for the top, but the base section can be printed as is with no support. I recommend PLA, 10% infill with .2 layer height.
If you find this helpful, please consider using the following link next time you are shopping on Amazon from the USA, it's an affiliate link that costs you nothing, but helps me earn small commissions: https://www.amazon.com/ref=as_li_ss_tl?ie=UTF8&linkCode=sl2&tag=techtweak1-20&linkId=ebf017a7e76c15c296897eb2c058f285
Thank you!
Supports touching buildplate should be used for the top, but the base section can be printed as is with no support. I recommend PLA, 10% infill with .2 layer height.
If you find this helpful, please consider using the following link next time you are shopping on Amazon from the USA, it's an affiliate link that costs you nothing, but helps me earn small commissions: https://www.amazon.com/ref=as_li_ss_tl?ie=UTF8&linkCode=sl2&tag=techtweak1-20&linkId=ebf017a7e76c15c296897eb2c058f285
Thank you!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
