Thingiverse
Anycubic i3 Mega camera mount
di zmc
70
Download
34
Likes
1
Makes
This is a camera mount for Anycubic i3 Mega. The allows raspberry pi camera to be mounted at the right hand side z-axis carriage.
It would be easier to design a mount on left hand side z-axis carriage, but the part cooling fan duct obstructs the nozzle view, so I design a mount for right hand side.
The two provided rod is used to connect the "body 1" and "body 2" (hammer them in).
Additionally,it needs two M3 screw (common for a 3d printer) and something to pin the camera module to the mount (I used some cut tooth pick, like shown in the picture).
Don't forget to use a high infill percentage, since some force is required to put everything together.
It would be easier to design a mount on left hand side z-axis carriage, but the part cooling fan duct obstructs the nozzle view, so I design a mount for right hand side.
The two provided rod is used to connect the "body 1" and "body 2" (hammer them in).
Additionally,it needs two M3 screw (common for a 3d printer) and something to pin the camera module to the mount (I used some cut tooth pick, like shown in the picture).
Don't forget to use a high infill percentage, since some force is required to put everything together.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
