Thingiverse

Anycubic I3 Mega + E3D Hemera (Direct Drive)

by Sergiu_I

221 Downloads

139 Likes

3 Makes

This is my adaptation of the E3D Hemera extruder on Anycubic I3 Mega as direct drive unit. There are two main components required to be (relatively easy) printed. Additionally, two tensioners, a bracket for the drag chain and a cover for the PCB board are all 30 minutes very simple prints.
I have used an E3D Volcano heating block and Igus RJ4JP-01-08 polymer bearings - but these are optional - normal LMU8 or LM8UU bearings and any other E3D (type) block can be used.

- EDIT 1: Added for E3D V6 heating block a dedicated fairing for the 5015 blower.

- FINAL EDIT:
The last minor design evolution and refinements, as well as the complete CAD data, 2d drawing and hi-res pictures are saved in:
https://github.com/Sergiu-I/Ai3M---FoX-50mm-ZX-Axis/tree/CAD-Files
If opening a step file and saving the required models as STL files sounds unfamiliar or is too much trouble, the included models are very good too - they are fully tested and satisfactory working on several machines.

Th

Anycubic anycubici3mega Anycubic I3 Mega direct direct-drive direct drive direct drive extruder e3dhemera e3d hemera E3D Hemera Mount e3d hermes E3D Hotend E3D Volcano extruder Hemera 5015 Hemera mount Anycubic anycubici3mega Anycubic I3 Mega direct direct-drive direct drive direct drive extruder e3dhemera e3d hemera E3D Hemera Mount e3d hermes E3D Hotend E3D Volcano extruder Hemera 5015 Hemera mount

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format