Anycubic I3 Mega Project "Diamond Hotend" - "Tutorial"

Hi Folks,

this is my very own Experience for setting up the Anycubic I3 Mega for printing Multicolor (3 Colours) with the Diamond Hotend.

In this Tutorial I will give you some "Know How" and useful tricks to come to an successful happy End. I will give you also a short overview what you need and place some links where to find the things you need.

Attention: This Tutorial is for using RUMBA+ Board and complete new wiring, because you can´t use the Trigorilla for 3 Extruders.

!! IMPORTANT ATTENTION: You will follow this Tutorial at you own Risk. I am not the responsible Person if you did´t know what you are doing here ! And I am not responsible for any kind of damage to your Printer. This is your very own decision to start this Project. !! Keep this in Mind !!

First of all, what would I like to achieve ?: to print in 3 colours :-) that was easy.

Here is a shopping list for all the Parts you will need for your project (no personal referrer, just links):

1. I decided