Thingiverse
Anycubic I3 Mega Spool Holder
di dede67
50
Download
36
Likes
2
Makes
A filament spool holder where the spool is placed at the top edge of the printer.
The filament is turned 180° so that it can be fed from below into the extruder (which is at its standard installation location).
Only the metal ball has to be unscrewed from the filament sensor, with which it is otherwise attached to the magnet.
When changing filaments, it is first fed (through the sensor) directly into the extruder and then threaded into the *deflection device* in the second step.
BOM:
3x 608 ball bearing
350mm of an 8mm aluminum rod
1x screw M4x16 + self locking nut
The filament is turned 180° so that it can be fed from below into the extruder (which is at its standard installation location).
Only the metal ball has to be unscrewed from the filament sensor, with which it is otherwise attached to the magnet.
When changing filaments, it is first fed (through the sensor) directly into the extruder and then threaded into the *deflection device* in the second step.
BOM:
3x 608 ball bearing
350mm of an 8mm aluminum rod
1x screw M4x16 + self locking nut
dede67 pubblica anche su
7 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
