Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / 3D Printer Accessories / Anycubic i3 Mega Top Spoolholder
Anycubic i3 Mega Top Spoolholder – 3D printable model from MakerWorld MakerWorld
3D Printer Accessories

Anycubic i3 Mega Top Spoolholder

by David Krammer · 3D Printer Accessories
21 Downloads
12 Likes
5 Makes
Go to Model
I did upgrade my i3 Mega to Titan Aero some time ago and thought i would need a new Spool Holder, so i temporary mounted it on some wire on the wall. But now time has come and i finished my own spool holder and i think it works great, as you can also switch filament very very easy! The mounting is also quite simple and the 6 parts are printed in about 4h (depends on your settings) Hope you enjoy it! Part List: 4x 608ZZ Bearings 6x M4 Screws 6x M4 Nuts 2x v2_holder.stl 2x v2_top.stl 2x v2_bottom.stl I printed all parts with 20% infill. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.16mm Infill: 20% Filament:Anycubic PLA Black Category: 3D Printer Accessories
Category
3D Printer Accessories
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
no supports · 6-part assembly · significant post-processing
Support-free 6 parts to assemble Hardware needed
Supports 0/3
Assembly 2/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
4 h
Post-processing
Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

David Krammer also publishes on

15 additional models across 1 more platforms

Printables
15 models
♥ 380 ↓ 3,053 ⚒ 30
Verified by matching model titles across platforms.
Frequently Asked Questions
Does Anycubic i3 Mega Top Spoolholder need supports when printing?
No supports needed for Anycubic i3 Mega Top Spoolholder — it's designed to print clean off the bed.
How long does it take to print Anycubic i3 Mega Top Spoolholder?
According to the design notes, Anycubic i3 Mega Top Spoolholder takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Anycubic i3 Mega Top Spoolholder available in?
Anycubic i3 Mega Top Spoolholder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Anycubic i3 Mega Top Spoolholder free to download?
Yes, Anycubic i3 Mega Top Spoolholder is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Anycubic i3 Mega Top Spoolholder
Anycubic i3 Mega Top Spoolholder
by David Krammer
↓ 43 ♥ 9
Anycubic i3 Mega-S Spool Holder
Anycubic i3 Mega-S Spool Holder
by tyler
↓ 211 ♥ 25
TUSH - The Ultimate Spool Holder for Anycubic I3 MEGA
TUSH - The Ultimate Spool Holder for Anycubic I3 MEGA
by Fruchtzerg89
↓ 170 ♥ 12
Anycubic i3 Mega-S Spool Holder
Anycubic i3 Mega-S Spool Holder
by Tyler
↓ 43 ♥ 2
Anycubic i3 Mega Filament Holder (Direct Drive)
Anycubic i3 Mega Filament Holder (Direct Drive)
by RTDLX27
↓ 65 ♥ 9
Spool Holder For Anycubic Mega S,X, and Chiron
Spool Holder For Anycubic Mega S,X, and Chiron
by Dedfly
↓ 198 ♥ 29
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection