Anycubic Refillable Cardboard Core Container

Anycubic Refillable Cardboard Core Container 🇺🇸 Now that Anycubic has released its new Refill spools, I wanted to reuse the cardboard cores somehow to get the most out of each unit. Inside these containers you can store items such as screws, nuts, washers, small parts of printed parts for later assembly, candy, etc. This design is for Refill cardboard cores with dimensions of 81.5mm inner diameter and 88.5mm outer diameter. This model is also compatible with Artillery brand filament cardboard spools. No supports are required when printing, no glue is needed for joints thanks to tight tolerances (0.2 mm), and the containers can be stacked on top of each other. The lids are closed with a screw thread. Screwing it on is difficult at first. I recommend screwing it on a little and unscrewing it several times. After several attempts, the screw thread will eventually turn smoothly.The first tray would be the core set. This is the tray most of you will use. Printing it with a 0.20 Standard p