AP7 Integral Suppressor / Amplifier AAP01

Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available.

#####General:
- The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the standard M14x1 CCW thread. Since printing threads is challenging, use a small nozzle and layer height no more than 0.1mm. Even then, tolerances may not be the same as on my printer, so first attempt to thread the locknut onto a metal barrel, not the plastic AAP01 barrel! Some force will likely be needed the first time, so work it until it becomes looser. Alternatively, if you have one, use a tap
- For mounting, either use a long 10mm Allen key, if you don't have one, a printable tool is provided
- Use high bed temperature since even very limited warping will cause the kit to sit visibly angled. Even then, some shimming or filing may be required

#####Suppressor:
- Components: body, inlay, cap, locknut; *optional: inlay, mounting tool*
- Extra har