Thingiverse
APC UPS Battery Harness - Modular
von The_BeardBot
22
Downloads
25
Likes
0
Makes
Modular battery harness for APC Uninterruptible Power Supply (UPS). Designed for models such as SmartUPS or similar. Can be used for 2-battery or 4-battery configuration. Multiple harnesses can be joined together using the joiner and still allow cable passthrough.
Designed to not require support material. Prints okay with 1 or 2 shells, but no more than that. If printing in ABS, I recommend printing with a raft and putting a helper disk about 1 or 2 mm away from each corner of the harness (like in the screenshot).
Wiring diagrams and other APC information:
https://beardedmaker.com/wiki/index.php?title=APC_Smart-UPS
Designed to not require support material. Prints okay with 1 or 2 shells, but no more than that. If printing in ABS, I recommend printing with a raft and putting a helper disk about 1 or 2 mm away from each corner of the harness (like in the screenshot).
Wiring diagrams and other APC information:
https://beardedmaker.com/wiki/index.php?title=APC_Smart-UPS
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
