Aphex Twin Windowlicker HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.8mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Sakura Pink At layer #14 (1.2mm) swap to Jade White At layer #16 (1.36mm) swap to Blue