Apple Logo Flip-top Box

by muzz64 · Household

1.1k Downloads

1k Likes

23 Makes

Go to Model

The 'Apple Flip-top Box' is a must print for every Apple fan...

This is a one piece print of an Apple logo shaped container for small things. The top / lid of the box is hinged so it flips backwards to open.

At standard scale the internal storage area measures approx. 54mm (W) x 51mm (H) x 41mm (D).. It can be scaled up but scaling down is not recommended as it will reduce clearances so moving parts may fuse together. Even at standard scale a small amount of 'wriggling' may be required to break the top / bottom free from each other so they move freely.

This is a straight forward PLA print (ABS may be a challenge due to the extreme angles used in a few areas). It should be a straight forward print for machines with a filament fan and good bridging capability.

Wall thicknesses have been kept thin to minimize filament consumption and print time. Raft is optional. Do not use any automated support as it could fuse the hinge and fill the internal storage area. To ensure it is

apple Apple Iphone color computer designer endstop fun gift hinged holder home household imac iphone iPhone 5 iphone 4 iphone 6 iphone 4s holder laptop Mac mobile mobile phone office organisation organization phone present print in place printrbot secret container small Spaceship