Apple Turtle Flexi ( Commercial Use)

Here is this month's Commercial Bonus File: the Apple Turtle! I meant to add a bite mark into the crabapple crab but had completely forgotten - so here it is on a turtle. The Apple Turtle has two forms - regular and one with a worm hole to fit a little worm friend in. Worm - it is very small with small links, if you have a smaller nozzle than the typical .4, it would benefit from being printed with that. I printed my worms with a .4 size nozzle, but the links need to be gently rotated after it is cool. Dried filament or regular PLA may hold up better than silks here. Print worm first, if you aren't sure how well your printer will do with it - larger worm in pics was printed at 110%, it probably could be scaled up a bit bigger and still fit.   STL/3MF Multicolor Regular eyes/ 6mm eye sockets  Print Settings: Print in Place No Supports needed Arachne walls 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray