Aquarium hang filter V2

The perfected model of my cheap hang-on-back filter. Designed so that the pump (Aquael pat mini or similar-sized pump) fits inside the filter itself.

If you are using this for a shrimp tank then be sure to also use a sponge for the inlet so that no animals get sucked up.

Features:
* 1 compartment for the pump
* 2 compartments for filter media
* "slide" outlet to remove any noise from the water exiting the filter
* Overflow protection
* Lid to prevent any contaminates from entering the filter

I have been using this filter for over 3 months now in multiple tanks and it works flawlessly.

Installation guide:
1. Print the parts
2. Place the pump in the first compartment and drill an appropriate sized hole where the inlet is.
3. Install some tubing in the hole you drilled and connect it to the pump's inlet.
4. Slide a filter sponge onto the inlet pipe if you are using this for tanks with small animals in it.
5. Glue the clamping bottom onto the underside of the filter