Aquarium Splitter - Support Free

8-Way Aquarium Air Splitter - Print Settings and DescriptionDescriptionThis practical aquarium accessory distributes air from a single pump to up to 8 separate outlets! The triangular tower design features multiple barbed connectors extending from each side, allowing you to connect multiple air lines for decorations, air stones, or sponge filters. The central vertical tube connects to your air pump, while the angled base provides stability. The top features additional mounting options for secure placement. Perfect for complex aquarium setups requiring multiple air-driven devices from one pump source.Print SettingsLayer Height: 0.2mm (0.16mm for better air-tight seal quality)Infill: 50-70% (higher infill for durability and air-tightness)Infill Pattern: Cubic or gyroid for strengthSupports: Minimal - may need light supports for the barbed connectorsSupport Type: Tree supports with lower density to minimize cleanupWall Line Count: 4-5 walls for air-tight constructionTop/Bottom Layers: 5-6 layers for solid sealPrint Speed: 40-50mm/s (slower for better layer adhesion and air-tightness)Nozzle Temperature: 205-215°C (PLA) / 235-245°C (PETG recommended)Bed Temperature: 60°C (PLA) / 80°C (PETG)Cooling: 50-75% fan (balance between layer adhesion and detail)Orientation: Print with the flat base on the build plate as shown in Image 2Adhesion: Brim or raft recommended for stabilityMaterial: PETG strongly recommended (better water resistance and flexibility for tube connections), or ABS. PLA may work but is less ideal for aquarium use.Post-Processing:Remove supports carefully from barbed connectorsCheck all air passages are clearTest fit airline tubing (standard 3/16" or 4/6mm tubing)Rinse thoroughly before useOptional: Seal with aquarium-safe silicone if any air leaks detectedEstimated Print Time: 3-5 hours (depending on size and settings)Usage Notes: Ensure tight connections on all barbs. Use check valves on air lines if needed. The splitter may reduce air pressure to each outl