Thingiverse
AR488 enclosure
von dl6lr
5
Downloads
2
Likes
1
Makes
This is an enclosure for an Arduino Pro Micro based GPIB adapter created by artag.
See https://www.eevblog.com/forum/projects/ar488-arduino-based-gpib-adapter/ and https://github.com/Twilight-Logic/AR488.
There are two versions: One with receptables to plug the Arduino Pro Micro to the board, one with direct soldering the boards together. The latter one I haven't tested yet.
This is for a metric M3x16 screw and nut, feel free to adapt for imperial screws and nuts.
See https://www.eevblog.com/forum/projects/ar488-arduino-based-gpib-adapter/ and https://github.com/Twilight-Logic/AR488.
There are two versions: One with receptables to plug the Arduino Pro Micro to the board, one with direct soldering the boards together. The latter one I haven't tested yet.
This is for a metric M3x16 screw and nut, feel free to adapt for imperial screws and nuts.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!