Arale hueforge honeycomb

Project: arale.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 218.25x190.19mm in sizeYou may print at higher layer heights below the Base Thickness of 0.24mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.48mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #2 (0.32mm) swap to Red At layer #3 (0.4mm) swap to Blue At layer #6 (0.64mm) swap to Indigo Purple At layer #10 (0.96mm) swap to Sky Blue At layer #19 (1.68mm) swap to Skin At layer #25 (2.16mm) swap to Jade White for the rest. I