Aranet 4 Home Stand

This is a stand for the Aranet 4 home Co2 sensor

https://aranet.com/en/home/products/aranet4-home

I made it mainly so the Sensor sits at a slight angle to make it easier to read when the sun shines on the display.

Print settings I used
Filament: PLA
layer height 2mm
support: 20%
infill: 20-25%

Print position: [I flipped the main body 180 degrees] though you would need to use the print position that work the best for your printer

Used screw size: 3mm [self-tapping]