Arathi Basin Alliance Banner

Arathi Basin Alliance Banner – for all those who wants to show their faction affiliation… and for those who want to hunt for the trophy. Oh, and I forgot about „Double Agent” achievement owners who just want to have them both :) Ready for you to download and print! 18cm height, 9.7cm wide. Perfect desk size. No glue required and banners are interchangeable. You may use one stand for Alliance or Horde banners. Or put them both – one each side. Very easy to print in multicolor, even on printer without AMS! Tips for printing: First of all, this model was designed for 0.4mm nozzle and 0.2mm layer height. Don’t go for bigger nozzles or higher layers. If you want increase quality you may use 0.2mm nozzle and 0.1mm layer but it’s not necessary. Print it in single color if you want to hand paint it or print in multicolor. My tips are for multicolor printing without AMS. I’ve done it on Prusa MINI. All files are standard (not Bambu Studio) 3mf files. Load them to slicer same as STL’s. I color them all for easier determining how to paint. As each part of the model require just 2 colors (hangers are single color) you may change filament manually on certain layer and continue your print. Banner: Prepare blue and gold/yellow/”golden brown”/transparent filament for the banner. In Bambu Studio (or your favourite slicer), set pause at layer 3 and at layer 6. Filament change will not work for printers without AMS, Bambu Studio not adding M600 command to gcode. M601 is good enough, so we change our filaments after pause manually :) Set the speed for 1st layer really low. Alliance logo is complicated, my printer likes to pull filament out of the heatbed on z-hop when printing too fast. 15mm/s was what I used. DO NOT USE Elephant Foot compensation. Some parts of the logo are 1-line wide so you can’t squeeze them. Do not use any support. During print start with blue filament, after pause at the beginning of layer 3 change it with gold/yellow/transparent, continue for 3 layers and at the