Arc Reactor Fidget Spinner

Ironman arc reactor fidget spinner.

It is designed to work with a 26mm outer diameter and a 10mm inner diameter bearing. I know this is not a standard bearing size but its the only bearings i had lying around. if you are interested in one that fits a standard size bearing leave me a comment and if there is enough interest i will make one.


Building instructions:

parts list:
26mm OD and 10mm ID bearing
20mm long m3 bolt x1
copper wire and 36 resistors are not essential these are just for aesthetics.
3d printed parts

You will need to print:
base x 1
bearing spacer x 1
top&bottom x 2
coil x 10

Assembly instructions:
Glue the 10 coils onto the base and push the bearing spacer into the bearing and then clip the bearing into the base. The m3 bolt is used to align the top and bottom with the centre of the bearing spacer after they are glued the bolt can be removed. When you are finished you can add the wire to the coils and resistors or any other parts as you see f