Arca swiss parametric camera backpack clip

A locking, arca swiss compatible, camera clip for your backpack or anything else you want to attach it to. The model includes an arca swiss compatible plate if you wish to print that too, so it can be used as a self-sustained system as well.

## Build materials

- 2x M4 nut
- 2x M4 bolts, length depends on the thickness of the backpack strap, 20mm is most likely good.
- 1x M3 nut
- 1x M3 x 20mm bolt
- 1x Ballpen spring
- 1x Tripod bolt (see note)

> **note**: The tripod bolt I used was pulled from an old tripod mount I found lying around, it had a weird shape and so to use a more standard bolt you will have to adjust the parameters of the model in the model spreadsheet.



## Build instructions
### Locking mechanism

Insert your M3 bolt into the “lock puller” (little nubbin at the end of the bolt in the images). Insert that bolt into the rightmost bolt hole, add the spring stop, and insert the bolt through that too, then clip about 6 to 7mm from the ballpen spring and insert the bolt