Arcade Controller with Side Pinball Buttons

This 3D-printed arcade controller was designed for a classic 6-button layout with additional pinball buttons on both sides - perfect for retro gaming, emulators, or custom DIY builds. 🎮 It offers a clean design, solid structure, and plenty of space for wiring and internal components. There are 4 different bottom cover designs included, giving you a few options depending on your preferred look. The controller requires 4 × M4 × 6 mm countersunk screws for the bottom cover and 4 × M2 × 6 mm screws for the PCB, along with the matching heat-set inserts. For the PCB mounts, 1–2 inserts are usually enough. The joystick mounts use 4 × M5 × 8 mm screws with the matching M5 nuts,. I’m using a Sanwa-style joystick and 28 mm arcade buttons, which fit perfectly into the default hole sizes - but the button openings can easily be adjusted if you're using different hardware. The set I used : https://amzn.eu/d/3d97Od2 🖨️ Suggested Print Settings Layer Height: 0.16 - 0.20 Infill: 10 - 15 % Supports: O