Thingiverse
Arcade Stick
von DavTech_3D
133
Downloads
117
Likes
1
Makes
Hi all!
I felt the urge to design an arcade stick case myself because I always wanted to make one but despite serveral research on different websites i've never been able to find one that I really liked.
After a couple of weeks of testing I'm happy with it, it's pretty large and comfortable, the printed parts are solid, and if you glue a couple of rocks in it to make it heavier it's way better.
I'm having only one issue with this design, right now the bottom of the case must be glued to the top side because the bottom part is pretty large and using only screws to attach it to the top side will make it bend. I've not been able to sketch any screw housing on the middle section.
Suggested Hardware/Software:
EG START Zero Delay ( shorturl.at/qCK89 )
Old PC
Any RetroArch OS (Like retropie, batocera, etc)
A bunch of Old-But-Gold MAME Roms ;)
Dimensions:
Width: 35 cm
Height: 6,6 cm
Depth: 20 cm
Printing Time: +/- 24 hours
Print Weight: 320 grams
Would you like to buy me a macchiato? http
I felt the urge to design an arcade stick case myself because I always wanted to make one but despite serveral research on different websites i've never been able to find one that I really liked.
After a couple of weeks of testing I'm happy with it, it's pretty large and comfortable, the printed parts are solid, and if you glue a couple of rocks in it to make it heavier it's way better.
I'm having only one issue with this design, right now the bottom of the case must be glued to the top side because the bottom part is pretty large and using only screws to attach it to the top side will make it bend. I've not been able to sketch any screw housing on the middle section.
Suggested Hardware/Software:
EG START Zero Delay ( shorturl.at/qCK89 )
Old PC
Any RetroArch OS (Like retropie, batocera, etc)
A bunch of Old-But-Gold MAME Roms ;)
Dimensions:
Width: 35 cm
Height: 6,6 cm
Depth: 20 cm
Printing Time: +/- 24 hours
Print Weight: 320 grams
Would you like to buy me a macchiato? http
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
![[MINI EDITION] Smart Watch Arcade Charger](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS3ce77905809714%2Fdesign%2F2024-07-26_a227ebbd935b2.jpg&w=400&h=300)
![Smart Watch Arcade Charger [Apple & Samsung]](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUS87d2a2927f5b5f%2Fdesign%2F2024-07-15_0ecdc647aa324.jpg&w=400&h=300)