Arcade Ticket Fidget Slider

A fun fidget slider in the shape of an arcade ticket!Heavily inspired by Meshminds' Ace Poker Fidget: https://makerworld.com/en/models/211337-ace-poker-fidget-slider#profileId-503187 This project requires 12 6x2mm disc magnets. (6mm diameter, 2mm tall) I found a pack of 100 on amazon for $10. Assembly:Super glue magnets into each slot on the first base keeping the same polarity for each magnet. (I put a small dot of super glue in the hole, then placed the magnet on a large metal allen key, then pressed that down in the hole for about 10 seconds)Switch polarity of magnets for the second base and super glue those in. (Make sure your magnets attract before you super glue these ones in. You can place one in the slot, hold it with your finger and push the two halves together and make sure they attract)After the glue sets, spread some more super glue over the inside of the base, then press and hold the insert down with the text facing up. It should be lying on top of the exposed magnets.