Arcanine Hueforge

Hueforge Arcanine The current profile is setup for use with an AMS for which the black filament should be changed out for red after the black layers have finished. The final color uses bambu labs PLA beige but white would also like work just as well. Swap instructions Project: Arcanine.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x188.94mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #16 (1.36mm) swap to Beige for the res