Thingiverse
Archery - Pocket Quiver
door Nyndroth
17
Downloads
27
Likes
0
Makes
English:
A small and neat Pocket-Quiver I designed for my backpocket.
Scale as you need it. At 100% the holes are 8.25mm wide and tilted from the inner to the outer holes by 1 degree, 1,5 degrees and 2 degrees, so the feathers/vanes do not rub together ;)
For example:
If you shoot .245-shafts with 5/16 inch combo-points you should scale to around 106%.
The six little holes are measured for M3 screws, if you want to mount the quiver to something like a drop-leg-platform or a backpack.
BONUS:
If you are especially cool you can print your quiver with the logo of the best club in the world ... Bowhunter Castrop :)
Deutsch:
Kleiner Taschenköcher für die Hosentasche.
Lochdurchmesser für die Pfeile bei 100% Skalierung 8.25mm.
Für unterschiedliche Pfeil-/Spitzendurchmesser einfach hoch- oder runterskalieren ;)
Beispiel: .245er Pfeile mit 5/16 Combo-Spitzen funktionieren bei mir perfekt mit 106% Skalierung.
Neigung der Löcher von innen nach Aussen 1 Grad / 1,5
A small and neat Pocket-Quiver I designed for my backpocket.
Scale as you need it. At 100% the holes are 8.25mm wide and tilted from the inner to the outer holes by 1 degree, 1,5 degrees and 2 degrees, so the feathers/vanes do not rub together ;)
For example:
If you shoot .245-shafts with 5/16 inch combo-points you should scale to around 106%.
The six little holes are measured for M3 screws, if you want to mount the quiver to something like a drop-leg-platform or a backpack.
BONUS:
If you are especially cool you can print your quiver with the logo of the best club in the world ... Bowhunter Castrop :)
Deutsch:
Kleiner Taschenköcher für die Hosentasche.
Lochdurchmesser für die Pfeile bei 100% Skalierung 8.25mm.
Für unterschiedliche Pfeil-/Spitzendurchmesser einfach hoch- oder runterskalieren ;)
Beispiel: .245er Pfeile mit 5/16 Combo-Spitzen funktionieren bei mir perfekt mit 106% Skalierung.
Neigung der Löcher von innen nach Aussen 1 Grad / 1,5
Nyndroth publiceert ook op
9 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!