Arctic Squirtle - Hueforge

Arctic Squirtle - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 1mmThe Model is 200x100mm in sizeYou may print at higher layer heights below the Base Thickness of 1.04mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.48mm Filaments Used: #212721 PLA HS Anycubic Pearl Black Transmission Distance: 0.3 #3e55ab PLA HS Anycubic Dazzling Blue NT Transmission Distance: 1.5 #15a9c2 PLA Sunlu Meta Sky Blue Transmission Distance: 6.5 #ffffff PLA+ Sunlu White Transmission Distance: 6.6This print uses 4 unique filaments Attached .3mf file prints the first 4 layers at 0.26mm then the rest at 0.08mm for faster print time.The layer numbers will be different but the layer height will be the same (swap layer #10, #14, #17 if you use the .3mf)Swap Instructions: Start with Pearl Black At layer #7 (1.52mm) swap to Dazzling Blue NT At layer #11 (1.84mm) swap to Sky Blue At layer #14 (2.08mm) swap to White for the rest.