Arctis Nova Pro Wireless Base Station Mount – 3D printable model from MakerWorld

MakerWorld

Electronics

Arctis Nova Pro Wireless Base Station Mount

by Kgball · Electronics

78 Downloads

23 Likes

37 Makes

Go to Model

My favorite headset base station needed a space.Under the desk there is a good place. Can mount with screw or with double sided tape:double sided tape width : 15 mmscrew M3 or M4 x length the bracket is 5mm + desk widthThe screw holes are reinforced: wallx4 infill30% Magnet version:Designed around the strong bambulab magnet.Of course it works with other magnets if they fit in the magnet hole.Magnet hole dimensions: 3,5x11x52 mmThere are 2 pauses during printing to insert the magnets. Print without support. Check out my other model too:Arctis Nova Pro Wireless Headset Holder

steelseries steelseries arctis arctis nova arctis steelseries arctis nova pro dac Nova nova pro Wireless wireless mount mounting bracket headset headphone nova pro nova pro wireless base station desk table

Category

Electronics

Source

MakerWorld

Published

25.05.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

52 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Arctis Nova Pro Wireless Base Station Mount?

Any FDM printer should handle Arctis Nova Pro Wireless Base Station Mount just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 52 mm is recommended.

Does Arctis Nova Pro Wireless Base Station Mount need supports when printing?

No supports needed for Arctis Nova Pro Wireless Base Station Mount — it's designed to print clean off the bed.

What file format is Arctis Nova Pro Wireless Base Station Mount available in?

Arctis Nova Pro Wireless Base Station Mount is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Arctis Nova Pro Wireless Base Station Mount free to download?

Yes, Arctis Nova Pro Wireless Base Station Mount is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL