Arduino_case

This is a case for an Arduino Mega. This piece can be use with an other of my desing (Adapter) as you can view on my pictures.

Links :

Arduino : https://www.amazon.ca/Carte-ATMEGA2560-ATMEGA16U2-C%C3%A2ble-Arduino/dp/B07LD6KV55/ref=sr_1_16?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Arduino+Mega&qid=1564370322&s=gateway&sr=8-16

Adapter (1) : https://www.thingiverse.com/thing:3776710

Terminal block (6) : https://www.amazon.ca/100-pcs-Pole-Mount-bornier-300/dp/B07D71JNQD/ref=sr_1_14?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=Terminal+block&qid=1564367569&s=gateway&sr=8-14

1.To fix adapter on the case, you will need 4 screws M5 with nuts. You juste have to encase the adapter at the back of the case and screw by the case.

2. Make wires to be plug into the board and able to be weld to the terminal block.

3. Put terminals blocks in the holes at the top and at the bottom. After that, weld the wires to the terminals blocks.

4. Fix the board in the case