Arduino Learning Station Remix - Modular

I love the idea of the Arduino station, but not the idea of a 49 hour print and 500g of filament with a that's 25% tree supports. I separated it into three pieces, that all print on an Ender 3/5 (you may have to adjust the usable build plate size in Cura from 220 to 235mm) and only needs support in one spot. It cuts the total print time down by 23 hours, and saves about 25% of the filament as well.

After printing, I used a soldering iron to weld it together at the seams wherever I could get to it. One drawer (Left Drawer) can be made about a mm or so taller, because I had to shift the upper surface a bit in order to get a good flat print. I made it 20.5 mm tall overall in Cura, will report back on how it fits.