ARGENTINIAN TEGU

This is a picture of my sons tegu , which is now getting quite large at about two to three foot long , its tame and likes to wander around , i pet that is not for the faint hearted , and requires a great deal of care , but its definitely a beautiful animal Project: TEGU.JPGPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170.49x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest. this file is for personnel use only if you print please rate or just leave a comment , love to hear