Arkangel runcam micro pod

UPDATE3:
Sparrow B.Bailey version added with micro axii, No frsky antenna holes.. This is a pod under construction, hence I have not printed it myself or even run it through the slicer for sanity check :/

UPDATE2: Upon request I added antenna tube holes, I hope these gets clear of the Prop and the oncoming gates :)

UPDATE: Final version is up, 2 versions. One with airholes for races that never start in time and one for the rainy/snowy days :D
I never know what angle I run on the cams but I think around 50-55 degree. lower angle should be fine. Possibly the top of the pod will limit the view. Need to flighttest that.



20mm standoffs I use, hobbywing stack and a gigantic XF receiver. Mach2 vtx and axii antenna(not lumenier). Right now the cam hits the vtx as the vtx is mounted abit high. On the sideholes I see there are holes into the canopy in the slicer but I dont see it on the printed part. Strength wise I dont think this matter. Pictures from PLA print. I recommend pri