Thingiverse
Arkham Batarang
von Nivuahc
24
Downloads
16
Likes
0
Makes
I'm teaching myself Fusion 360 and decided to take a crack at the Arkahm Batarang for my son.
This is meant for display and was designed to be extremely tight fitting and solid.
THIS IS NOT A FOLDING BATARANG.
When printed at full scale the Batarang will be approximately 14 inches from tip to tip.
The intent is that each wing should be printed twice and opposing wings should be glued together. The nibs on the top cap will need to be sanded or filed in order to fit tightly. This is intentional. I wanted the tightest reasonable fit that I could get.
Once the one that I'm printing is completed/painted I will add a photo of the finished product.
This is meant for display and was designed to be extremely tight fitting and solid.
THIS IS NOT A FOLDING BATARANG.
When printed at full scale the Batarang will be approximately 14 inches from tip to tip.
The intent is that each wing should be printed twice and opposing wings should be glued together. The nibs on the top cap will need to be sanded or filed in order to fit tightly. This is intentional. I wanted the tightest reasonable fit that I could get.
Once the one that I'm printing is completed/painted I will add a photo of the finished product.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
