Armageddon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.6mm Filaments Used:PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Silver Transmission Distance: 0.5This print uses 7 unique filaments. Substitute as needed. Swap Instructions:Start with OrangeAt layer #10 (0.88mm) swap to RedAt layer #14 (1.2mm) swap to OrangeAt layer #26 (2.16mm) swap to YellowAt layer #32 (2.64mm) swap to BlackAt layer #37 (3.04mm) swap to Jade WhiteAt layer #39 (3.2mm) swap to Blue GrayAt layer #42 (3.44mm) swap to Jade WhiteAt layer #45 (3.68mm) swap t