Arrow Rocket (Estes 13mm)

This is a fun little rocket that uses Estes Mini (13mm) motors like the A10-3T. It's perfect for smaller parks as it looks like it goes pretty high (looks, mind you, probably only gets 300 feet or so) and comes down via streamer so there's not much drift. It's a quick and easy build too.

You will need BT-5 (13mm) body tubes and epoxy for construction. An xacto knife to clean things up will help too. You'll also need a shock cord and streamer, though this rocket could probably fall fine without the streamer.

Build Notes:

1) Print the nose cone with 100% infill for weight.

2) Use kevlar line for a shock cord, about 2 feet of it. The line goes through the holes in the bottom of the nose cone. These are a half loop so threading in one makes it come out the other.

3) Poke two small holes about a half inch apart in the top of the body tube about 2 inches from the end. Thread the kevlar line through these holes, knotting it at the bottom hole. It's probably easier if yo