Arrow tapering tool

Quick and dirty arrow tapering tool for non-standard shaft sizes or an over-engineered pencil sharpener Basically a hollow pipe that's tapered towards the bottom and fit's onto a 13mm nut and is used with any drill.Just insert a sheet of sand paper and turn any stick into a slightly pointier stick. The long one for the front (arrow tip side): tapers shafts from max 13mm down to about 10 mm over a length of 220 mm.The short one for the back (arrow nock side) tapers shafts from max 13mm down to 8 over 75 mm.→ the long one can be used on both sides first, of courseI designed this to dramatically cut down on the time I need to sand my warbow arrow shafts down to the desired dimensions. Since standard tapering tools don't fit I came up with this. INSTRUCTIONS:see pictures to make things clearInsert a folded piece of sand paper into tapering toolpull all the way to the backuse the “stick” to create a tunnel.slide the cover over the tapering tooltwist and rotate to fold the excess