Artists Paint Mixer

Print them Small and Many!

Print reccommend 10x (80mm square) For model makers or even less.

for small sizes don't used the combined print (may not seperate)

gcode has been included for 5x sized print which is ideal for fine model maker
(my printer uses 0.4mm nozzle and 1.7 mm filament)




Artists paint mixer:

Paint at outer edges should dry faster than inner.

This will give you ability to get textures correct.

For water artists there is plentyof area for dry mixing or setting some of the towers for "dirty mixing"

Alright, its not the best for water artists (but does hold spills if using tower inner)

It's more for fine brush model makers where you want alot of colours but not to much at any one time and you want your cans closed.

ie. Fill all voids with desired colours
Fill some towers with turps - use those for cleaning, use sharp inner edge of tower to remove excess and re-dip.
Use outer shelf too do quick mixes.


Printing the Lid: Should work