Artwork | MoonWatcher | 2024

Artwork : MoonWatcher Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.99x121.9mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: S