as de picas

as de picas en este trabajo se utilizan 5 colores. Project: picas.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PLA smatfil rojo Transmission Distance: 2.3 PLA smartfil gris Transmission Distance: 0.8 PLA smatfil White Transmission Distance: 6This print uses 5 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray At layer #14 (1.2mm) swap to rojo At layer #17 (1.44mm) swap to gris At layer #19 (1.6mm) swap to White for the rest.Proyecto: picas.hfpImprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mmEl modelo tiene un tamaño de 200x200 mm.Puede imprimir en a