Ascent 32 - Tracks

Tracks for the Redcat Ascent 32. Boost MeWant more free STLs like this? Consider boosting me!Required Hardware(8) - 10mm x 15mm x 4mm bearings(16) - 4mm x 9mm x 4mm bearings(32) - M2 x 8mm screws The idler wheels have a pause command at layer 38. When the printer pauses, drop the 4mm x 9mm x 4mm bearings into the cavities and then resume printing. The bearings will be locked in place. Press the 10mm x 15mm x 4mm bearings into the inner and outer frames. The inner frames are marked with L and R to distinguish left and right. Install the idler support shafts with four M2 x 8mm screws. Install the idler wheels and spacers. Install the sprocket. The hex side of the sprocket should be closest to the inner frame.<img class="image_resized" style="width: 42.15%"