Thingiverse
Aspys Barefoot Shoes
von RiverFamily
121
Downloads
309
Likes
1
Makes
Video: https://www.youtube.com/watch?v=nii49-HuheE
---
Shoes sizes: EU
---
Filament: Recreus 82A, 3Dfils 85A
__Use TPU 95A first (Overture)__, don't use "high speed", "high flow" (too stiff, uncomfortable)
---
Depending on the size, each pair of shoes takes 9 to 12 hours, weights 120 to 160 grams
__I suggest using my universal print files (gcodes) instead of slicing. Find the gcodes in “Aspys print files.zip” folder__
__Upload the gcodes on an SD card and insert it in any printer. Launch the gcode from the printer interface, ignore warnings and proceed. Adjust temperature and fan speed once the print starts to fit your filament needs__
Printer requirements for the gcodes: 0.6mm nozzle, 250 x 250 x 300 buildplate fits every size, 256 x 256 x 256 fits size 41, 250 x 250 x 250mm fits size 40
---
Cura Slicer Settings (see Aspys_Cura_Project.3mf):
- layer height: 0.36mm
- infill line width: 0.65 (or 0.4 with 162% infill flow)
- wall line count: 0
- top layers: 0
- botto
---
Shoes sizes: EU
---
Filament: Recreus 82A, 3Dfils 85A
__Use TPU 95A first (Overture)__, don't use "high speed", "high flow" (too stiff, uncomfortable)
---
Depending on the size, each pair of shoes takes 9 to 12 hours, weights 120 to 160 grams
__I suggest using my universal print files (gcodes) instead of slicing. Find the gcodes in “Aspys print files.zip” folder__
__Upload the gcodes on an SD card and insert it in any printer. Launch the gcode from the printer interface, ignore warnings and proceed. Adjust temperature and fan speed once the print starts to fit your filament needs__
Printer requirements for the gcodes: 0.6mm nozzle, 250 x 250 x 300 buildplate fits every size, 256 x 256 x 256 fits size 41, 250 x 250 x 250mm fits size 40
---
Cura Slicer Settings (see Aspys_Cura_Project.3mf):
- layer height: 0.36mm
- infill line width: 0.65 (or 0.4 with 162% infill flow)
- wall line count: 0
- top layers: 0
- botto
RiverFamily veröffentlicht auch auf
15 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
